Home » Products » Pipe ID Labels

Pipe ID Labels

To identify pipe runs for both installation and maintenance of pipework, for both contractors and staff.

- Long life adhesive stickers
- Standard sizes 25 x 200mm and 50 x 383mm
- Rolls of 50
- Stock pipeline markers
- Custom labels also available
- All labels come with directional arrows to indicate flow

Codes & Drawings
Technical Details

Pipe ID Labels 200x25mm

wdt_ID	Code	Description
1	ID25CHF	CHILLED F
2	ID25CHR	CHILLED R
3	ID25COF	COOLING WATER F
4	ID25COR	COOLING WATER R
5	ID25DC	DOM COLD WATER
6	ID25DH	DOM HOT WATER
7	ID25DHF	DOM HOT WATER F
8	ID25DHR	DOM HOT WATER R
9	ID25HPC	HP COLD WATER
10	ID25LHEF	L HEATING F
11	ID25LHER	L HEATING R
12	ID25LPC	LP COLD WATER
13	ID25NON	NON POTABLE WATER
14	ID25POW	POTABLE WATER
15	ID25WAT	WATER
16	ID25CO	CONDENSATE
17	ID25CODRN	CONDENSATE DRNS
18	ID25LPG	LPG
19	ID25NA	NATURAL GAS
20	ID25DRN	DRAINS
21	ID25FLRDRN	FLOOR DRAINS
22	ID25FLU	FLUSHING
23	ID25OFL	OVERFLOW
24	ID25SO	SOIL
25	ID25ST	STORMWATER
26	ID25VE	VENT
27	ID25WAS	WASTE

Pipe ID Labels 383x50mm

wdt_ID	Code	Description
28	ID50DCW	DOM COLD WATER
29	ID50DCR	DOM COLD WATER R
30	ID50DH	DOM HOT WATER
31	ID50DHF	DOM HOT WATER F
32	ID50DHR	DOM HOT WATER R
33	ID50NON	NON POTABLE WATER
34	ID50POW	POTABLE WATER
35	ID50CON	CONDENSATE
36	ID50STE	STEAM
37	ID50LPG	LPG GAS
38	ID50NA	NATURAL GAS
39	ID50SO	SOIL
40	ID50ST	STORMWATER
41	ID50VE	VENT
42	ID50WAS	WASTE
43	ID50COM	COMPRESSED AIR

Placement

- As per NZS 5807:1980
- Within one meter of each valve
- Near junctions
- In positions where hidden pipes reappear
- Maximum intervals of 8 meters on exposed pipes
- Remove/trim arrows as required to identify flow direction

Applicable Standards

NZS 5807:1980, AS 1345:1995

Application Guidelines

Surfaces should be smooth, clean and dry before application.

Clean surfaces by removing any debris and oily residue with isopropyl alcohol if required.

Textured surfaces will reduce contact area for the label and may impact adhesive performance.

Once applied do not reposition.

If applied to pipe lagging test the surface prior to full project application and/or check with lagging supplier.

Adhesives will not adhere to PTFE / Teflon like surfaces.

BPIR