Boss Gully Trap
When space is an issue.
- High quality ABS moulding with PP Access plug
- To suit 100mm floor waste for easy accessibility
- 1 x 50mm and 2 x 40mm inlets, and a 65mm outlet
- 70mm water seal
- Solvent cement to PVC pipe work – Simply drill out inlets as required
- Manufactured and tested to AS 2887: Plastic Waste Fittings
- Complies with Clause 3.0 Water Traps of NZBC G13 Foul Water
- Watermark Approved License Number WMKT 21223
- Long nose pliers should be used to remove access plug
- When installed, ensure access plug is no further than 400mm from floor
- level to allow for removal of plug